Designed for the Sports Enthusiast who demands the highest quality sharpening tools and abrasives, the Edge Pro Pull-Thru Knife sharpener delivers a level of sharpening performance unmatched by standard edge care products.
This sharpener offers two stages of sharpening for all types of knives, everything from everyday pocket knives to the finest customer sport knives.
The precision ground carbides remove metal in a smoother, more consistent fashion when setting the edge on very dull straight edge blades and the specially shaped ceramic stones can be used to lightly hone either STRAIGHT or SERRATED edge blades.
It has an ergonomically designed soft grip handle and non-slip rubber feet for comfort and safety.
Features:
Two stages of sharpening - Coarse & Fine
Sharpens standard and serrated edge knife blades
Premium abrasives for sharper, longer lasting cutting edge
Precision ground carbides for quick edge setting
Specially-shaped ceramic stones for sharpening standard or serrated edge blades
Extra-Fine ceramic stones for final edge honing
Fixed angle abrasive components provide consistent results every time
Quick, safe, and easy to use
Ergonomically designed soft grip handle for comfort and control during use
Non-slip rubber base for secure and stable sharpening
Caution: Always rest your sharpener on a sturdy, flat surface and use the handle of the sharpener for stability and control during sharpening.
Place the Edge-Pro Pull-Thru Knife Sharpener on a flat, sturdy surface. Hold the handle of the sharpener with one hand and the knife with the other hand.
Select the appropriate sharpening slot to use. COARSE = quick, aggressive removal of metal. Use for quick edge setting of very dull or damaged blades. Usually, 4 to 5 strokes is all it takes, but knives made of very hard steel may take additional strokes. FINE = removes very little metal. Use for final edge honing and polishing or to touch up an already sharp blade. Usually, 8 to 10 strokes is all it takes, but knives made of very hard steel may take additional strokes. Note: A reasonably sharp blade may only require light honing in the Extra Fine sharpeening slot. The Fine sharpening slot is intended for dull blades that require more maintenance.
Insert knife blade into the preferred sharpening slot at a 90-degree angle to the sharpener. Tilt the tip of the knife blade down just slightly. Press down with light to moderate pressure and pull the knife blade through the sharpening slot from the heel to tip (never back and forth). Repeat this action until blade is sharp. If you started the sharpening process in the COARSE slot, move to the FINE slot for final edge honing. Always finish the sharpening process in the FINE slot.
Reversible & Replaceable Carbide Blades and Ceramic Stones – When the carbide blades and/or ceramic stones stop removing metal from the knife blade, they can be rotated for use on the other side or replaced. To rotate or replace, remove the two screws and the plastic cover. Remove the stones and rotate 180 degrees. Reverse positions by placing the front ceramic stone into the back slot, and the back ceramic stone into the front slot. Replace the cover and screws. If replacing, add new blades or stones then replace the cover and screws.
Care & Storage:
Always clean your sharpener after use. Clean with a damp cloth or mild brush. Do not rinse with water. Store in a drawer or cabinet.
I love these over-mitts. Can you do fine manipulation work in them? Absolutely not. In fact, you'll have trouble adjusting the zip on your jacket. I have a pair of roomy Merino mittens I wear underneath them. When my hands are wet and cold I swap to these and the result is incredibly satisfying! Like a Gore Tex jacket for your hands.
MTP MVP Gortex Outer Mittens New British Army
Marcus Alexander
Great store!
Incredibly helpful store with some fantastic finds!
Viper Modular Adjustable Holster
Debra Peacock
Nice trousers
Quick delivery.
Have bought these trousers before so I knew they were good quality
Jack Pyke - Weardale Trousers
michael markey
MTP BERGAN COVER 120LTR
Its in not too bad condition slight tear but to be expected giving it being surplus.
It certainly looks well used. Has little life left in it. Will do until I source a DPM one.
Communication was good. Good customer service. Delivery service was runing late.
They did inform me.
I would certainly highly recommend this store and their services.
British Army MTP Rucksack Cover Bergen Large and small
max croasdale
Exceptional service
Exceptional service and great quality goods.
Thanks again!
Bond Sweater Royal Navy 007 - 100% Ribbed British Wool, Herringbone Cuff, Shock Cord
I love these over-mitts. Can you do fine manipulation work in them? Absolutely not. In fact, you'll have trouble adjusting the zip on your jacket. I have a pair of roomy Merino mittens I wear underneath them. When my hands are wet and cold I swap to these and the result is incredibly satisfying! Like a Gore Tex jacket for your hands.
Came without the center utility pouch - not worth crying over, but it did make me sad for a second.
Took forever to ship. Maybe that’s a British thing. Here in America they’d take away your cheeseburgers for waiting two weeks to put something in the mailbox.
But enough whining. It’s true, the British PLCE is some of the most comfortable belt kit I’ve ever worn. The harness/yoke supports and distributes the weight of the belt extremely well. While objectively not as modular as MOLLE, the system is much slimmer than MOLLE, which is really nice. The design for attaching pouches to belt is brilliant, and keeps everything in place better than, say, old U.S. Army ALICE clips.
Knowing full well it’s not what this rig was designed for, I purchased this intending to modify the ammo pouches to fit two AK magazines in each pouch. So that’ll happen as soon as I get some time.
For its intended use, it’s a comfortable and ergonomic way to carry your fighting load. Twelve M16/M4 (or L85 if you’re a godless freak) magazines, two canteens…and nothing else because I didn’t get any more pouches. (Okay, I promise I’m done whining for real)
